ICP Construction California Paints Fixall Paint Storm System
Exterior Stains
& Finishes
Storm System
Mold & Mildew
Solutions

Mold Resistant Paint & Primer

Storm Systems Logo
Step 3 Product
Step 1
Step 2
Step 3

Two Great Products to Keep Mold from Coming Back

White Mold Resistant Paint

  • Provides up to 10 years mold resistance
  • Tintable, low VOC paint
  • 3x the mold resistance of other paints

Clear Mold Resistant Paint

  • Provides up to 10 years mold resistance
  • Clear coating for surfaces not typically painted
  • Applies white and dries clear
  • 3x the mold resistance of other paints

White Mold Resistant Paint

Storm offers White Mold-Resistant Paint, an easy-to-apply tintable coating that creates a mold resistant barrier ensuring long-term mold and mildew resistance on the surface of the cured coating film. This product is a 100% acrylic, low-VOC coating that has been tested by certified laboratories to provide superior resistance to mold growth on the surface of the coating for 10 years. Use this product after application of Storm Disinfectant & Deodorizer on wood, plaster, sheetrock, wallboard, masonry block, concrete, metal, galvanized metal, and new structural materials during construction.

Mold Resistant Paint & Primer: MSDS
Mold Resistant Paint & Primer: SPECS

Clear Mold Resistant Paint

Storm offers Clear Mold-Resistant Paint, an easy-to-use coating that creates a clear mold resistant barrier ensuring long-term mold and mildew resistance on the surface of the cured coating film. This product is a 100% acrylic, low-VOC coating that has been tested by certified laboratories to provide resistance to mold growth on the surface of the coating for 10 years. Use this product after Storm Disinfectant & Deodorizer on wood, plaster, sheetrock, wallboard, masonry block, concrete, primed metal, galvanized metal, and new structural materials during construction.

Mold Resistant Paint & Primer: MSDS
Mold Resistant Paint & Primer: SPECS

Key Features

  • Provides 10-year mold and mildew resistance
  • Easy to apply, 100% acrylic, tintable, low VOC
  • Contains a fungistatic agent to resist mold growth on the dry coating surface
  • Does not require priming for most substrates
  • 3X the active found in common kitchen and bath paints
  • Suitable for nearly all paintable surfaces
  • Provides 10-year mold and mildew resistance
  • Easy to apply, 100% acrylic, low VOC
  • Contains a fungistatic agent to resist mold growth on the dry coating surface
  • Applies white and dries clear
  • 3X the active found in common kitchen and bath paints
  • Suitable for nearly all paintable surfaces
  • Perfect for discreetly coating subfloors and attics
  • Use on:
  • wood
  • plaster
  • wallboard
  • sheet rock
  • masonry block
  • concrete
  • primed metal
  • galvanized metal
  • and new
  • structural materials

LET’S GET STARTED

Kitchens are susceptible to mold and mildew growth because of high moisture and humidity levels coupled with the fact that ovens, gas ranges, leaks from water pipes, drains and refrigerators can cause moisture to spread.

Pro Tip

Properly install an exhaust fan to accompany kitchen appliances that produce moisture for adequate spot ventilation. Check for plumbing leaks by running each faucet for at least 5 minutes while observing for any visible leaks.

Outdoor surfaces are highly susceptible to mold and mildew stain buildup due to continual exposure to the elements. Bleach cleaners can discolor substrates, while Storm Mold & Mildew Solutions clean, kill and control mold without harming the color of the material.

Pro Tip

Take care to remove any excess accumulation of rain on outdoor surfaces to prevent moisture buildup. Apply Step 3 Control Clear Mold Resistant Barrier regularly.

Bathrooms provide ideal conditions for mold and mildew growth, due to heavy moisture and humidity.

Pro Tip

To help prevent future mold and mildew problems, make sure the room has a properly installed ventilation system and use it often, especially when producing moisture, to reduce humidity buildup on bathroom surfaces.

Living spaces can provide ideal conditions for mold and mildew growth due to heavy moisture and humidity produced by appliances and even condensation on windows.

Pro Tip

Increase ventilation or air movement by opening doors and/or windows, when practical. Use fans as needed, especially when producing moisture, to reduce humidity living space surfaces.

When moisture travels with the rising heat, it is often trapped in attics and condenses on exposed surfaces and freezes during cold conditions. The freezing and thawing pattern contributes to added moisture, creating ideal conditions for mold and mildew growth.

Pro Tip

Eliminate all air bypasses into the attic by sealing off the area before installing insulation and seal off all penetrations into the attic. Ventilate attic with passive vents to promote proper air circulation.

Constant moisture and dampness in the garage make it one of the prime locations in a home for mold and mildew growth.

Pro Tip

Keep your garage as dry as possible by eliminating anything that contains or requires water. Installing roof vents will help reduce condensation by drawing out the air and water vapor.

Water damage, flooding, dampness, and humidity levels make basements very prone to mold and mildew growth.

Pro Tip

Control mold and mildew growth by keeping the humidity level below 55%. Installing a dehumidifier and using it often, as well as ensuring proper air circulation, will reduce humidity in the home.

Outdoor furniture is highly susceptible to mold and mildew stain buildup due to continual exposure to the elements. Bleach cleaners can discolor furniture, while Storm Mold & Mildew Solutions clean, kill and control mold without harming the color of the furniture’s material.

Pro Tip

Take care to remove any excess accumulation of rain on outdoor furniture to prevent moisture buildup. Apply Step 3 Control Clear Mold Resistant Barrier regularly.



FIND A STORM CENTER

Enter an zip code and click the find locations button.